DIY Lightning McQueen Halloween Costume

When my little man asked me to make him a race car costume for this past Halloween, I was secretly thankful that he didn't request something that required sewing! It's like he somehow knew that this was not exactly one of my best strengths, and he instead chose to play to a particular skill that I possess: making cool stuff out of cardboard. More likely, it was just that he really wanted to be his favorite character, Lightning McQueen. My inspiration was the Lightning McQueen pinata that I had made for his third birthday party. Having already accomplished that, I was pretty sure I could pull this off. After many hours, I had created a costume that we were both pretty excited about (and it only cost me $3 for two cans of red spray paint)!

{The finished costume!}

Materials:

• cardboard box
• pencil
• scissors
• masking tape
• red spray paint
• acrylic paint: black, white, red, orange, yellow, turquoise
• paint brushes/paint trays (old Styrofoam trays)
• black Sharpie marker
• hot glue gun
• wide red ribbon
• craft knife
• Mod Podge
• computer/printer
• scratch paper (optional)
• tracing paper (optional)
• clear spray shellac (optional)

Directions for Making a Car Costume:

1. First I found a box that was in good condition and was large enough. A clerk at Meijer happily gave me this when I asked about boxes.
2. Then, I removed all of the tape. I also took off the labels as best as I could.
3. Next, I cut off two of the four flaps from the bottom of the box and set them aside. (This was so that he could easily fit his legs through the bottom, but it would still have some cardboard to give it structure.)
4. I flattened the box and drew a car shape on one side like I had done when I made the Lightning McQueen pinata. Then, I cut around the lines, leaving the other sides of the box in tact. I used some scratch paper, traced the car shape, cut it out, and then used it for a template to draw the same same on the reverse side. I cut that out and then I had two sides of the car that matched up.
5. After that, I measured my son to determine how big of a hole I would approximately need for the center. He's pretty thin, so I just ended up tracing around a big bowl and cutting out the circle from the top of the box.
6. Next, I re-taped the bottom of the box, using many strips of masking tape along the seams. This made it easier to do the next step. To make the taping stage go more smoothly, I tore off many, many strips of tape and then draped them along the edges of my table before starting.
7. To shape the car, I started with the back section of the body (the flat side that I had drawn on) and I bent the top panel of the box down (easily) to meet the side. Then, I taped it, first with many short pieces of tape going up and over, then with longer strips going lengthwise over the top. A way to describe this more visually would be that it resembles stitches. I did the same to the opposite side of the car.

   

   {Shaping the side}

8. For the top of the car, I taped the flaps together around the cut-out circle, making adjustments with my scissors as needed. 
9. Then, I reinforced all of the inside seams with tape "stitches" and added another layer of tape "stitches" to the outer seams.
10. For the front end of the car, I cut about 3 inches off the flap (that would be the hood section), and this may have been slightly more than I needed to trim. Then, I folded it down to meet the top and sides and taped everything in place using my "stitches" method.

    

    {Shaping the front end}

11. To make the tail fin, I flipped the box over and used the blade of my scissors to score the inside of the flap, about 2 1/2" inches in. I did this along the entire length of the flap and then flipped it right side up and easily pushed the section of the box down along the scored section, making a peak. Then, I just taped the rest of the rear end of the car in place, again using my "stitches" technique. (Note: This was the end of shaping the box into a car. I would have liked the front end to be more rounded to look more like Lightning McQueen, but given time constraints, I decided this was good enough. Plus, it was still reasonably sturdy and I didn't want to tamper with that aspect considering it would be worn several times by my 4-year-old and I needed it to hold up!)

    

    {Shaping the tail fin}

12. I took the box car outside and spray painted it red. Once the first coat was dry, I applied a second coat. After that, I finished it with a third coat of spray paint. In all, this was more than one can, but less than two cans of paint. This was enough to get good coverage, hiding any writing on the box, and filling in all the taped areas which were initially much lighter than the cardboard. By this point, it was looking more like a race car, but it definitely needed some special details to be transformed into his favorite character!

Directions for Decorating the Costume:

1. The front end: I traced a plastic bottle cap for the eyes and a button for the pupils. The rest of the eye area I drew freehand. I painted this with white acrylic paint and turquoise acrylic paint, and outlined it all with black Sharpie, including filling in the pupils. I drew the mouth freehand and painted it white and then outlined it with Sharpie. The Rust-eze logo on the "hood" is one I printed from the Internet and just sized the way I wanted in Microsoft Word. I applied it with a foam paintbrush and Mod Podge.
2. The sides: I drew the side windows freehand and painted them gray by mixing black and white acrylic paints. Then, I went around the outsides with black Sharpie. The lightning bolt I also drew freehand, and then I used tracing paper to trace it and reverse it for the opposite side of the car, which was a big sanity and time saver! I painted these with a gradation of color from orange to yellow, with the two blended in the middle. Then I Mod Podged my number 95 "decals" on. Again, these were copied from the Internet and pasted in Microsoft Word, where I could size them the way I wanted. After applying the "decals," I outlined the lightning bolts with my black Sharpie.
3. The tail fin: This Rust-eze logo was found online and printed off. I cut it out with scissors (and a craft knife for some of the smaller spots) and then decoupaged it on the front of the fin.
4. The back end: Admittedly, by this point, I was getting worn out, so I simplified the tail end a bit. I included another Rust-eze logo like the one on the tail fin. Then, I drew "tail lights" and painted them orange and yellow, outlining them with my black Sharpie.

   

   {The rear view}

5. The tires: Deciding it wasn't worth my time or energy to reinvent the wheel, I pulled the two rear wheels from this party game. For the front tires, I traced a pan or a bowl onto one of the flaps of cardboard that were left over from step 3 for shaping my box car. Whatever it was, I chose it because it was the largest round object in my kitchen that would fit onto that cardboard flap. After cutting out both circles, I painted them and added details just as I had done for the Pit Stop party game (and if you need directions, just click the link). I used my hot glue gun to adhere all four tires to the car.
6. The straps: I used two lengths of 1 1/2" wired red ribbon that I had on hand. I had him wear the costume so I could tell wear to place the straps, and I made pencil marks where I would put holes. To make the holes, I used a craft knife to make a small "x" in each spot I had marked. Then, I pushed the ribbon through the tops of the holes and knotted on the underside. I used masking tape to hold the extra ribbon on the insides of the car, rather than cutting it, just in case I needed to adjust the lengths on Halloween night. (In Michigan, we never know if it will be 60 degrees or if they will be wearing snowsuits!)
7. Finishing the costume: For good measure, I applied a coat of clear spray shellac. (Again, this was something I already had on hand.) It turned out that was a good precaution because it was a very, very rainy Halloween! Once he put the costume on, we realized it was hanging slightly funny, and we decided it was because the straps were spaced slightly too far apart for his narrow shoulders. (Remember, I had to make the opening kind of big in case he was going to wear five layers!) I fixed this problem by grabbing some red and white bakers twine and tying the twos straps together in the back. He was able to slip in on and off without adjusting anything, but it stayed in place well while he was wearing the costume.

{Don't they look so happy together?}

{Everyone agreed that this was a very cool costume!}

And Then the Doorbell Rang...

I realize that it's been a while since I have done a post. Really, I have tons of stuff to say, but I wanted to make it truly count this time around. You see, this is my 500th post! In my head, I had built this up to be something bigger than it really is, thinking that I needed to write something that would be a summation of all that I am and all that this blog stands for. And now, I have decided to end my self-imposed writer's block by simply telling a story of something that made me smile at a time when I really needed it.

In addition to getting myself worked up over the significance of what to write next, I got super busy with Halloween preparations  -- which I am sure many other moms out there can relate to. I actually lost count of how many hours I spent making my little man's Lightning McQueen Halloween costume (which came out pretty cool, and I promise I will post more on that later). Also, I may have said "yes" to taking on yet another project when I really should have said "no, not right now." And, I felt down because nobody was coming to a party that I had planned. Rationally, I knew that this wasn't personal, but it was upsetting nonetheless.

By Thursday evening, I was overtaxed, and I was definitely feeling it. The house looked like it was falling apart and I was getting pretty grumpy with the kids. I was exhausted in the evenings, looking around and feeling like I had accomplished nothing for an entire week -- except for yelling at my kids. (So, it turned out to be a blessing that no guests were coming to my party after all. This saved me from having to do one more thing: a "company clean!")

Then, Friday morning came, and things were starting to look up. After dropping Mia off at school, Logan and I headed to our MOPS group meeting, where I got to hear a great speaker share ways that we can do more "missions" as a family. This gave me hope for finding a solution to yet another thing that was weighing me down: the kids are currently going through a phase in which they seem to have a bad case of the "gimmes" -- not a good thing with the holidays fast approaching! After having some chat time with other mamas, and getting a much-needed hug, I left feeling excited about doing some random acts of kindness.

All the rest of that day, I spent countless hours hard at work transforming a cardboard box into a costume, because after the party was cancelled I realized that I would be taking the kids to a costume party, after all. This meant that my deadline was pushed up, waaaaaaay up, from this coming Thursday -- Halloween -- to the preceding Saturday! I was completely in a trance and had no idea what anybody else in the house was up to. I actually asked Brett at one point, "When did the toys get picked up from the living room floor?" and he told me, "You were painting." I asked something else, and got the same response, "You were painting." Then, I realized I missed quite a lot during that lost time.

The good news was that it came out well and Logan was very happy with his costume. They had a fun time at the party, but after 3 hours of treats and games, I was drained. We ended up doing a movie night just to get through the evening. Then after the kids went to bed, I tried to tackle some of the mess that had been left to accumulate "while I was painting." After 30 minutes or so, though, I was worn out. I had just sat down to take a break.

And then the doorbell rang...

Honestly, I was not at all happy about this. I was 8:45 at night, and my kids were (hopefully!) asleep. I glared at the dog and warned her not to do her usual machine-gun, someone's-at-the-door-and-I-must-alert-you! bark. Amazingly, she listened, but I was still alarmed at the thought of answering the door.

Who could be ringing the doorbell at this hour? Nervously, I looked out the window, and not seeing anybody there, I asked Brett what to do. I was thinking, Oh great! Somebody's pulling a Halloween prank on us and we're going to find a bag of flaming dog doo on the porch... or something worse! My next thought was, I hope it's not that Kirby vacuum salesman. He was ridiculously hard to get rid of! Brett suggested that we turn off the porch light, and after doing that, we noticed a large vehicle -- a van? -- parked on the street, slightly obscured by the neighbor's trees. Then, I tried to quiet my apprehensive and over-active imagination, It could be somebody doing something nice. You know we just talked about random acts of kindness at MOPS. They're waiting to see if we get the gift!

Feeling emboldened by my more positive thinking, I opened the front door...

And I found a purple plastic tub loaded with goodies: a preschool fishing game, a dice game meant for kids Mia's age, two bottles of flavored sparkling water, some sprinkle-covered chocolate doughnut holes, Halloween pencils, and glow-in-the-dark necklaces! There was also a note explaining that we had been boo'ed. (Now here was something I could relate to, after having done this for the past four years in our neighborhood!)

It turned out that nobody was out to get me, after all. Some sweet, thoughtful mama (and while I don't know for certain who is responsible, I have to assume that the most likely "suspects" are my MOPS friends) gave us everything we needed to have a fun family game night! She may have known that I was having a rough week (self-inflicted, mainly, but rough despite it all), or she might not have even realized that I was feeling overwhelmed with everything at that moment. Either way, I hope she knows that she brought a much needed smile to my face...

A smile that I intend to pay forward -- just not at night. That's when all the scary stuff happens -- at least in my imagination!

Mummy Dogs

In the "spirit" of Halloween, I decided to make a version of these mummy dogs for last night's dinner. I only made 5 (instead of 10) because that is how many hot dogs I had that weren't frozen, and I used slices of colby jack deli cheese in place of American cheese slices (which I haven't bought in a long time). I also lined my baking sheet with parchment paper, because we have found this to be very helpful when baking. Other changes I made were cutting the crescent rolls into strips of 8 instead of 10. It just seemed like it would be easier to work with wider strips. I think I was right because I still had strips that tore. As it was, they weren't more than 1/2 inch wide, so I can't imagine how much harder it would be if the strips were any narrower. I used a pizza slicer to cut the strips for the bandages instead of a knife or scissors the directions said to do. This plan worked great. Finally, I skipped the mustard eyes because we didn't have any in the refrigerator.

Overall, my mummy dogs were a success, despite all of the tweaks I made to the recipe. I am not sure how you even get the dough to wrap around 10 hot dogs; 5 seemed like plenty. And 1/2 piece of colby jack per mummy dog seemed about right. The cheese oozed out a bit, but that seems okay for creepy cuisine, right?

Halloween Cut-Out Sugar Cookies

{I decorated these cookies. The one one the right is the last little ball of dough, and I pinched a small stem with my fingers.}

{Cutting out the shapes}

I have been searching for the best sugar cookie recipe for awhile now. I am not sure if this is it, but it is pretty darn close. The dough is a great consistency for making cut-out cookies and the flavor is good. My only confusion is that they taste more like a butter cookie than a sugar cookie, which reminds me of shortbread. I think I will keep looking for the perfect sugar cookie recipe, but for now, I will share how these turned out. 

{There's no such thing as too much frosting.}

{Don't forget to add lots of sprinkles.}

{You may have to taste-test to ensure that your cookies are edible.}

{Take pride in your work.}

Possibly the best part of this whole experiment was trying out our jack-o'-lantern cookie cutter that I got on clearance at Jo-Ann's last year after Halloween. It's by Wilton and it has several smaller shapes that you can use to make the facial features, which I think is a cute idea instead of plain pumpkin cookies. For frosting, we used this recipe. Again, I am not sure it is the best one available, but it is the best I have tried so far. It is easy to make and easy to spread, and it made enough so that we could divide it up into different containers for making various colors. We left some plain white for the ghosts, and we mixed red and yellow food coloring to make orange for the jack-o'-lanterns. We also attempted (and failed) to make black for some cats (which we didn't even end up cutting out). It was more of a purplish gray, but it all tastes the same, so purple pumpkins were just fine. We also used green sugar sprinkles decorating (I was thinking of stems; the kids had other ideas.) as well as some other Halloween sprinkles. Making and decorating our Halloween cut-out cookies was good family fun, and I think it may become an annual tradition at our house.