Homemade Photo Prop for a Shark Birthday Party

This was the first project I started making for Logan's shark-themed birthday party, and once I saw this fellow swimming on my kitchen floor, I knew that I was track for a pretty "jawsome" birthday for my favorite little boy! (This was good news because scrounging up the appropriate amount of cardboard had been somewhat challenging, so once again, it pays to plan ahead, folks.) I found inspiration for this project here, but as always, I tried to figure out how to do it myself for as cheaply as possible. Note: While this project cost me next to nothing, (Proof positive: the best things in life are free!) it did take about 3 hours to complete, and that actually shows that I am getting faster at these cardboard constructions as I make more and more of them.

Materials:

• corrugated cardboard
• scissors
• pencil
• ruler
• tape: clear packaging, masking, Scotch
• Sharpies: black and red
• paint brushes
• white acrylic paint
• gray primer
• two white plastic bottle caps
• hot glue gun
• 2 blue plastic table covers

Directions:

1. First, I cut apart two of the largest boxes I could find to produce flat sections to work with.
2. Then, I laid them out and found the center with my ruler and pencil. I sketched out the shark's head, followed by the fins and tail section.
3. Next, I cut out the different parts of the shark's body, using scissors. I also used my scissors to cut out the inner part of the open shark's mouth.
4. I taped each section to the next, using lots of clear packaging tape. This was on the back (printed side) of each box piece, meaning that the front of my shark was plain brown cardboard.
5. I laid a vinyl tablecloth (used only for crafts) on my dining table and then painted the shark using gray primer that we already had on hand. A large foam paint brush worked very well for this, and since I got such great coverage, I only applied one coat. (This right here saved me lots of time. Normally when I make this sort of party prop, I need to do at minimum, two coats of acrylic paint.) I let this dry completely before moving on.
6. For the teeth, I used white acrylic paint and a smaller paint brush.
7. Afterward, I used a red Sharpie marker to draw in the gum line around the teeth. I followed that with a black Sharpie marker, which I also used for all of the outlining to make the shark look more finished.
8. The finishing touches were the eyes. I took two white bottle caps from apple juice containers and used the black Sharpie to make slit-like pupils. Then, I hot-glued each one to the top of the shark's head.
9. For the background, I used two blue plastic table covers from Dollar Tree. (So if you're keeping track, this project cost me a total of $2.12.) I folded them both in half and then I used lots of rolled masking tape to adhere the shark on top of the two table covers, which were held together with Scotch tape. After it was taped down, I cut away the inside of the shark's mouth so that there was no blue backdrop in that part. 
10. Displaying the photo booth was the hardest part to figure out. Luckily, Brett was able to help with the logistics. After trying several types of tape, we settled on clear packaging tape (and plenty of it!) to secure the layers of plastic table cover to the top of our mantel. (Failed attempts included Scotch tape, blue painter's tape from Dollar Tree, and masking tape.) I added some red table cover (left over from a previous party) to the inside of the mouth area by taping it to the fake fire place with Scotch tape.
11. The kids, and some brave adults, too, were then able to stand or kneel behind the backdrop, put their faces inside the shark's mouth, and let me take pictures (which were for the thank you cards). It stayed up for many days before I decided to take it down, and I think it was picture perfect.

{Say, "Ahhhhhhhhhhhhhh!"}

{You can't say I never post photos of myself!}

DIY Shark Party Decor: Warning Signs and Land Sharks

Logan's 4th birthday party turned out to be pretty "jawsome" and these homemade decorations helped set the tone right as guests were arriving. I was inspired by these signs that I saw online. So, I set out to make my own, using my cheap, go-to-party-decor material: cardboard. After the past couple of birthday parties -- Care Bears for Mia's 6th and Cars for Logan's 3rd -- I have decided that I can make just about anything out of cardboard! So, these signs and shark fins were not very difficult or time-consuming for me, and I was able to make them almost entirely with items I already had at home. (The only thing I had to purchase was another small bottle of yellow acrylic paint, which I believe was 53 cents at Wal-mart.)

{CAUTION: Shark Sighting!}

Materials for Fins:

• corrugated cardboard
• pencil
• scissors
• gray primer (or paint)
• large foam paintbrush
• Styrofoam tray (to hold paint)
• cereal box liner (to protect work surface)
• wooden skewers (2 per fin)

Directions for Making Fins:

1. Draw a shark fin onto the cardboard and cut it out. (I made three because odd numbers always make sense from a design perspective.)
2. Lay the cut-out on a flat surface. (Mine was the dining table protected by the cereal box liner.)
3. Cover the first side with gray primer (Paint would work as well, but Brett pointed out that we had primer already. Score! I didn't need to mix paints or buy any extra. This provided very good coverage, quickly and easily.) Let the primer/paint dry completely before moving the fin.
4. Now, flip it over and paint the other side. Again, let it dry completely, or you will end up with smudged paint. (Note: I also painted the outside edges of the fin, as best as I could. This is best left until the end of the painting process.)
5. Insert two skewers into the bottoms of each fin. These will fit directly into the spaces of the corrugated cardboard. Mine were placed about two inches from the outside edges. Tip: I found it tricky to insert the blunt ends into the cardboard, so I first expanded the openings by sticking in the sharp end of each skewer. Then, I removed the skewers, and flipped them around so that the sharp ends were pointed down. 
6. Stick skewers into the ground to make the sharks "swim" in your lawn. The skewers may end up poking up through the tops of the fins, so push them down and re-adjust as needed until they look the way that you want.

Materials for Warning Signs:

• corrugated cardboard
• pencil
• ruler
• scissors
• shark stencil
• black Sharpie marker
• yellow acrylic paint
• large foam paintbrush
• Styrofoam tray (to hold paint)
• cereal box liner (to protect work surface)
• 2 wooden skewers (for yard sign)
• masking tape (for hanging on door) 

Directions for Making Warning Signs:

1. Using a ruler for assistance, draw a rectangle shape from a piece of cardboard, to the dimensions that you would like. (Note: I decided on smaller signs than I have made in the past, for Logan's 2nd birthday which had a construction theme. This made things go faster, which was perfect, in my opinion. My "DANGER" sign is just 9" x 9" and my "CAUTION" sign is about 8 1/2" by 10 1/2".) Cut out your sign. Repeat as desired.
2. Protect work surface (and clothing) and then cover sign/s with yellow acrylic paint. Let dry, and add a second coat.
3. Using a ruler and a black Sharpie marker, create a black border for each sign. (On the "CAUTION" sign, this is set in about 1/2" and on the "DANGER" sign, it's only about 1/4".) 
4. Decide on the placement of the shark for each sign. Set the stencil down and then trace around the inside with your black marker. Fill in the entire shark outline. (Note: I used the Great White shark stencil from the set.)
5. Add your lettering. I chose to hand-letter the signs, but you could also use black letter stickers as a time-saver. I suggest using a ruler and a pencil to lightly block these in. First create a space for each word with a lightly-penciled line to show the tops of the letter and a lightly-penciled line to show the bottoms of the letters. I had three such lines for each sign. Then, find the approximate center of each word or grouping of words, and pencil in that central letter. Work your way out toward each side. Once the lettering looks the way you like (Remember, it doesn't need to be perfect! Mine certainly aren't.), go over it with black Sharpie. You can make corrections as you go. When in doubt, make the letters thicker. Note: The "CAUTION" sign also has some waves that I drew by hand so that the shark appears to be swimming near the top of the water.
6. Post your warning signs. I used masking tape to hang the "DANGER" sign on the front door. For the "CAUTION" sign, I used two wooden skewers, inserted with the same method as mentioned above for the shark fins. Then, I stuck it into the front yard near the "shark sighting" area with the three visible fins. 

DIY Napkins for a Shark Party Theme

One of the simplest projects that I did for Logan's "jawsome" 4th birthday party was stamping the napkins to go along with the theme. It's a simple trick I've used for various kids' birthday parties over the years. I just found a package of inexpensive party napkins (Dollar Tree has them in several colors, and this is where my package of 30 for this project was purchased) and a stamp that goes along with the theme. In the past, some of my stamps didn't perfectly "match" the theme, but if I had an ice cream cone or a cupcake stamp on hand, and my kiddo approved of it, then that's all I needed.

However, in this case, I didn't have anything suitable for Logan's desired shark theme. I found a stamp an under-sea stamp set on clearance at Wal-mart a few months before the party. It was just 50 cents, so I bought it, not even sure how I would use it at the time, but knowing that for that price it would be well worth it. (This is when it pays to listen when the kids start tossing out party suggestions. Then, whenever you happen to be out shopping, take a quick cruise through the clearance section and see what is there that could be useful for your upcoming celebration.) I strongly encourage advanced planning, if like me, you don't want to spend much money on birthday parties!

After pulling out the stamp pads that I had in my craft stash, I quickly decided to go with the teal color. Paired on top of the dark blue, it made the most sense to me as a shark swimming in the water. To get the best coverage on the stamp, I lightly tapped it about 3 or 4 times on the stamp pad and then firmly and evenly pressed it down onto the napkin. I re-inked the stamp before each impression to ensure even coverage.

One important thing to note about stamping on napkins, is that you will not get perfect delineation. The ink gets absorbed into the paper a bit, so don't expect crisp results. My shark stamp actually had an eye that showed up on first impression but then quickly faded as the ink was dispersed on the napkin. To me, this was not a big deal. I still got the shark I wanted (albeit eye-less), but it might make a difference if your stamp has lots of details that you feel are important to the overall design.

{Left: freshly stamped, Right: after ink dried}

In the end, I had 30 shark party napkins that cost me a total of $1.50. I fanned them out in two areas of the counter near the food and lemonade (which I had dyed blue to go along with the theme). Big impact, small price tag, happy birthday boy. Totally "jawsome!"